|
Prostage's first development was the use of a standard microphone cable for the transmission of the MIDI signal as well as power supply to the foot controller. In order to connect a Prostage Foot Controller to
your MIDI equipment, you need a XTM
(XLR to MIDI) adaptor (exceptions see below). If you use more than
one Foot Controller, only one XTM is needed. The adaptor also
supplies the Foot Controller(s) with power.
There are devices that are already equipped with the XLR connector
for Prostage BlackLine Foot Controllers. Therefore, no XTM | XTMpro
adaptor is required to connect a BlackLine Foot Controller to
one of the following units:
 |
|
Prostage XDS / XLS Loop & Switch Systems.
 |
 |
|
Diezel Herbert.
 |
 |
|
Diezel VH4(S) (a special retrofit kit is required).
 |
 |