Slide thumbnail

WahWah

Tremolo

Contour Boost

Treble Boost

Volume Pedal

Tuner

XTMpro - MIDI Adapter | Mapper

 I just wanted to get rid of that the support of the company Prostage set′s new standards. They refer to every problem; customer satisfaction seems to be at the top. Here you′ll not get 08/15 answers after 2 weeks, like often from large-scale producers, but approaches directed directly to the questions. And this within the shortest time. 
Florian, Germany

The XTMpro MIDI adapter | MIDI Mapper is the control center and the heart of a Prostage system. It is the interface between StageWire and MIDI.

The Prostage foot controllers are connected to the XTMpro adapter by a standard microphone cable. The adapter supplies the connected foot controller(s) with power.

MIDI compatible equipment is connected to one of the two MIDI outputs. A standard MIDI foot controller can be connected to the MIDI In.

Furthermore, the XTMpro MIDI adapter  offers an extensive MIDI mapping to control all kind of MIDI devices as well as a tap function. As an alternative, the Tap relay output can also be used for switching amp channels (per preset programmable).

The programming is very simple and easy using the free System Manager software (Mac & PC). 128 presets can be stored.

The XTMpro MIDI adapter is suitable to control all MIDI devices in a guitar rack.

  • Interface between StageWire and MIDI
  • Power supply for the Prostage foot controllers
  • MIDI mapper: Up to eight different devices can be controlled using individual program change or control change commands - each with their own MIDI channel.
  • Control Change converter: depending on the preset number, incoming Control Change commands can be converted into others. Example: on preset 1, the expression pedal controls the Remote WahWah, on preset 2 it controls the flanger of a 19" effects unit, ....
  • Router: The incoming MIDI data and switching commands can be sent to two MIDI Outs as well as the StageWire bus.
  • The song tempo (BPM) can be freely defined per preset. At preset change, the tempo is sent as MIDI command or via the tap relay output.
  • Switching relay that can either be used as Tap to control delays and multi-effect devices, or as per preset programmable relay to switch amp channels.
  • 128 presets can be stored.
  • Simple programming using the clearly structured System Manager software on your Mac or PC. (connection via USB).
  • Connections: StageWire, USB, 1x MIDI In, 2x MIDI Out, Tap-Relais (toggle switch / jack connector), power supply
  • Sturdy case made of steel sheet.
  • Power supply: 9-12V AC or DC
  • Dimensions (without mounting lugs): 162 x 52 x 44 mm


Required accessories:
12V AC Power supply
 


Hint:
Also available as XTMpro-R version with four switching relays.

Test Reports


Test reports are available only in German at the moment.
 

Videos (You Tube)


Prostage product presentation
XTMpro | X05 & X07 Foot Controller
System Manager Software

Reviews

Grade 

01/05/2010

Ich wollte hier nur mal loswerden, dass der Support der Firma Prostage Maßstäbe setzt. Hier wird auf jedes Problem eingegangen, die Zufriedenheit des Kunden scheint an oberster Stelle zu stehen. Hier gibts keine Pauschalantworten nach 2 Wochen, wie oft von Großserienproduzenten, sondern direkt auf die Fragen gerichtete Lösungsansätze, und das innerhalb kürzester Zeit.

    Write your review

    XTMpro - MIDI Adapter | Mapper

    Write your review

    €163.64
    Power Supply:
    Quantity

     

    5 Years Warranty

     

    30 Days Money back Guarantee

    • Power Supply 220-240 V