XDS - 19" Pedalboard | Looper for 8 Stompbox Effects

XDS - 19" Pedalboard | Looper for 8 Stompbox Effects
  • 19" 3U Rackdrawer with integrated octuple looper (two groups of four loops each).
  • Six completely isolated power supplies (4-9V DC adjustable, 9V DC, 12V DC, 18V DC, 9V AC and 12V AC). Short-circuit-proof.
  • Space for 8 stompboxes (size "Boss"; connected with right angle plugs).
  • StageWire; Connection for the Prostage foot controllers; incl. power supply
  • Works with all MIDI foot switches.
  • Responds to Program Change and Continuous Controller messages.
  • Simple programming of the loops using the eight switches and the store button.
  • Advanced programming using the clearly structured System Manager software on your Mac or PC. (Connection via USB).
  • MIDI Mapper, Control Change Converter, Router to control connected MIDI gear
    • MIDI mapper: Up to eight different devices can be controlled using individual program change or control change commands - each with their own MIDI channel.
    • Control Change converter: depending on the preset number, incoming Control Change commands can be converted into others. Example: on preset 1, the expression pedal controls the Remote WahWah, on preset 2 it controls the flanger of a 19" effects unit, ....
    • The song tempo (BPM) can be freely defined per preset. At preset change, the tempo is sent as MIDI command or via the tap relay output.
    • Router: The incoming MIDI data and switching commands can be sent to two MIDI Outs as well as the StageWire bus.
  • 128 Presets can be stored.
  • LED display for the switching states.
  • Additional switching relay that can either be used as Tap to control delays and multi-effect devices, or as per preset programmable relay to switch amp channels.
  • True Bypass; Signal switching using gold plated relais.
  • ClickFree switching technology for crackle-free switching.
  • Exclusively made of high-quality components (e.g. Neutrik® plugs).
  • Connections: StageWire, USB, 1x MIDI In, 2x MIDI Out, 2x Audio In, 8x Send/Return, 2x Audio Out (= 2 isolated 4-way Audio Loop Groups), Tap-Relay (toggle switch / jack connector)
  • Supplied Accessories
    • Wood plate (Pedalboard)
    • 1m Velcro
    • 2 sets cable labeling (in/out 1-8)
    • USB cable
    • Cable set for power supply:
      2x quad distribution cable
      2x connecting cable
      1x adaptor polarity changer
      1x adaptor 2.5mm plug
      1x adaptor mini-jack
      1x adaptor battery-clip
  • Extremly light weight (5,8 kg) thanks to its aluminium case.
  • Main power supply: 110-120V or 220-240V; 53 Watt
  • Drawer"s inner dimensions:
    8,2 cm high (the drawer is open to the top; if you leave one rackspace free above the drawer, you can also install higher effects)
    42,8 cm wide
    37,5 cm deep (deducting power supply area: 33 cm)
  • Installation depth: 38,5 cm


Hint:
Also available as custom order with four Loops or four Loops & four Switches.

Build your own 19“ effects device using your preferred stompboxes! Replace an effect unit whenever you like. Your pedalboard in rack size!

Using the innovative Prostage XDS guitar pedal looper, you can remotely switch your effects pedals. The 19" drawer provides space for eight stompboxes (size "Boss"), where they are well protected from flying beer cans and water bottles. Also the cable clutter on the front edge of the stage is history. During the show, the open drawer gives you convenient access to the pots, without having to kneel down on the floor.

Compared to conventional pedalboards, this guitar pedal looper provides much higher reliability, better audio quality as well as a faster assembling and disassembling. All you need is one cable between the effect rack and the MIDI foot controller at the front of the stage.

The "true bypass" circuit sends the signal only to the used effects (no signal loss and no noise caused by non-used effects).

The floor effects are remotely switched by a MIDI foot controller. Using the eight switches and the store button at the XDS, the stompboxes can also be switched manually and presets can be stored. Further programming is done very simply and easy using the free System Manager software (Mac & PC).

In addition, the XDS guitar pedal looper offers six power supplies for the effects, a StageWire port, a comprehensive MIDI mapping to control other MIDI devices as well as a tap tempo function. As an alternative, the Tap Relay output can also be used for switching amp channels (per preset programmable)

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha
     
  • Brand: Prostage
  • Product Code: XDS-8
  • Availability:: Pre-Order

6 reviews

  • 848.00€

  • Ex Tax: 700.83€

Available Options