Downloads MAC

System Manager Software for Mac


Prostage System Manager 2.13 (Mac OSX binary)
New Features:
- Support for the Guitar Amps: Kemper Profiler, Fractal Audio AxeFx, Avid Eleven Rack, Line6, Digitech.
- "Easy Setup" window for easy management of the Guitar Rig
- Creating Songs and Setlists


pdfSystem Manager Users Manual


System Manager Installation Instructions:
1. Unzip the downloaded file.
2. Move the folder "Prostage System Manager xxx" into your local application folder.


Firmware


Important Note for the Firmware Update from Version 1.xx to 2.10:
When upgrading from firmware version 1.xx to 2.10, you must be sure to update the foot controller(s) first, and the XTMpro | XDS | XLS only after that. Disconnect the foot controllers while updating the XTMpro | XDS | XLS. After the succesfull foot controller firmware update, you will see a "Timeout" error message which you must ignore. For further information, see users manual chapter 17.


Firmware for all StageWire units
(XDS | XLS | XTMpro => 2.10 | X10 => 2.10 | X07 => 2.10 | X05 => 2.10)


USB Driver for XDS | XLS | XTMpro (Mac)


Prostage USB Driver (OSX 10.9 and above)
Prostage USB Driver (OSX 10.3 to 10.8 - Intel)
Prostage USB Driver (OSX 10.0 to 10.2 - Intel)


USB Driver Installation Instructions:
1. Doubble click the downloaded file (.dmg) and follow the onscreen instructions

Downloads WIN

System Manager Software for PC


Prostage System Manager 2.13 (Windows XP upto Windows 10)
New Features:
- Support for the Guitar Amps: Kemper Profiler, Fractal Audio AxeFx, Avid Eleven Rack, Line6, Digitech.
- "Easy Setup" window for easy management of the Guitar Rig
- Creating Songs and Setlists


pdfSystem Manager Users Manual


System Manager Installation Instructions:
1. Unzip the downloaded file.
2. Move the folder "Prostage System Manager xxx" into your local application folder.


Firmware


Important Note for the Firmware Update from Version 1.xx to 2.10:
When upgrading from firmware version 1.xx to 2.10, you must be sure to update the foot controller(s) first, and the XTMpro | XDS | XLS only after that. Disconnect the foot controllers while updating the XTMpro | XDS | XLS. After the succesfull foot controller firmware update, you will see a "Timeout" error message which you must ignore. For further information, see users manual chapter 17.


Firmware for all StageWire units
(XDS | XLS | XTMpro => 2.10 | X10 => 2.10 | X07 => 2.10 | X05 => 2.10)


USB Driver for XDS | XLS | XTMpro (PC)


Prostage USB Driver (Windows 8 to 10)
Prostage USB Driver (Windows XP up to Windows 8)


USB Driver Installation Instructions:
1. Unzip the downloaded file.

2. On Windows 8 and 10 only:

  • Select the “Start” button.
  • Type “startup”.
  • Select “Change advanced startup settings“.
  • Select “Restart now” under the “Advanced startup” area.
  • Select “Troubleshoot“.
  • Select “Advanced Options“.
  • Select “Startup Options“.
  • Select “Restart“.
  • A menu will appear where you can press “7” on your keyboard to choose “Disable driver signing enforcement“.

3. When you connect the XTMpro for the first time, the assistant will ask you for a driver => Here you have to select the path where you did store the folder with the USB driver in step 1.
Hint: Please note that the driver may install as "FTDI Driver".


If you encounter Installation problems, please consult our FAQ

Free Guitar Rig Building Coaching

Get the ultimate Guitar Rig Building online coaching now!
Everything you need to know to avoid hum, noise and signal loss.